Телесистемы
 Разработка, производство и продажа радиоэлектронной аппаратуры
На главную   | Карта сайта | Пишите нам | В избранное
Требуется программист в Зеленограде
- обработка данных с датчиков; ColdFire; 40 тыс.
e-mail:jobsmp@pochta.ru

Телесистемы | Электроника | Конференция «Цифровые сигнальные процессоры (DSP) и их применение»

для 3.1 без проблем а для 3.3.глючит. бред.(+)

Отправлено блн 11 мая 2007 г. 11:53
В ответ на: не, -i -f board.cfg -v отправлено SM 11 мая 2007 г. 11:46

для 3.1
C:\CCStudio_v3.1\cc\bin>xdsprobe.exe -i -f board.cfg -v

-----[Select the controller]------------------------------------------

This utility has selected an XDS510 class product.
This utility will load the adapter 'sm510dvr.dll'.
This utility will operate on port address '0x0'.
The emulator adapter is named 'C:\CCStudio_v3.1\cc\bin\sm510dvr.dll'.
The emulator adapter is titled 'SM510PCI POD Adapter'.
The emulator adapter is version '3.3.12'.
The emulator adapter is uses 'Normal-Mode'.
The controller has an insertion length of '16' (0x0010).
The controller has a revision number of '1' (0x0001).
The controller type is 'The venerable TBC (74ACT8990)'.
The local memory has a base address of '0' (0x000000).
The local memory has a word capacity of '262144' (0x040000).

-----[Perform the scan-path length test on the JTAG IR and DR]--------

This scan-path test uses blocks of 512 32-bit words.

The test for the JTAG IR instruction scan-path length succeeded.
The JTAG IR instruction scan-path length is 38 bits.

The test for the JTAG DR bypass scan-path length succeeded.
The JTAG DR bypass scan-path length is 1 bits.

-----[Perform the scan-path integrity test on the JTAG IR]------------

This scan-path test uses blocks of 512 32-bit words.

Starting an Integrity Test using 0xFFFFFFFF.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0x00000000.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0xFE03E0E2.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0x01FC1F1D.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0x5533CCAA.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0xAACC3355.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
The JTAG IR integrity test has succeeded.

-----[Perform the scan-path integrity test on the JTAG DR]------------

This scan-path test uses blocks of 512 32-bit words.

Starting an Integrity Test using 0xFFFFFFFF.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0x00000000.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0xFE03E0E2.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0x01FC1F1D.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0x5533CCAA.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
Starting an Integrity Test using 0xAACC3355.
All of the 32-bit data values were scanned correctly.
Finished that Integrity Test.
The JTAG DR integrity test has succeeded.

ДЛЯ 3.3
C:\CCStudio_v3.3\cc\bin>xdsprobe.exe -i -f board.cfg -v

-----[Select the controller]--------------------------------------------

This utility has selected an XDS510 class product.
This utility will load the adapter 'sm510dvr.dll'.
This utility will operate on port address '0x0'.
The emulator adapter is named 'sm510dvr.dll'.
The emulator adapter is titled 'SM510PCI POD Adapter'.
The emulator adapter is version '33.12.0.0'.
The emulator adapter is using 'Normal-Mode'.
The controller has a version number of '1' (0x0001).
The controller has an insertion length of '16' (0x0010).
The local memory has a base address of '0' (0x000000).
The local memory has a word capacity of '262144' (0x040000).

-----[Perform the scan-path length test on the JTAG IR and DR]----------

This scan-path length test uses blocks of 512 32-bit words.

-----[The results of the scan-path length test on the JTAG IR and DR]---

The test for the JTAG IR instruction scan-path length failed.
The JTAG IR instruction scan-path is stuck-at-zero.

The test for the JTAG DR bypass scan-path length failed.
The JTAG DR bypass scan-path is stuck-at-zero.

-----[Perform the scan-path integrity test on the JTAG IR]--------------

This scan-path test uses blocks of 512 32-bit words.

Starting an Integrity Test using 0xFFFFFFFF.

-----[An error has occurred and this utility has aborted]---------------

This error is generated by TI's USCIF driver.

The value is `-270' (0xfffffef2).
The title is: `SC_ERR_SCN_LENGTH_CONTROL'.

The explanation is:
The length of the scan is too large for the emulators controller.

Составить ответ | Вернуться на конференцию

Ответы


Отправка ответа
Имя*: 
Пароль: 
E-mail: 
Тема*:

Сообщение:

Ссылка на URL: 
URL изображения: 

если вы незарегистрированный на форуме пользователь, то
для успешного добавления сообщения заполните поле, как указано ниже:
введите число 90:

Перейти к списку ответов | Конференция | Раздел "Электроника" | Главная страница | Карта сайта

Rambler's Top100 Рейтинг@Mail.ru
 
Web telesys.ru