Телесистемы
 Разработка, производство и продажа радиоэлектронной аппаратуры
На главную   | Карта сайта | Пишите нам | В избранное
Требуется программист в Зеленограде
- обработка данных с датчиков; ColdFire; 40 тыс.
e-mail:jobsmp@pochta.ru

Телесистемы | Электроника | Конференция «Цифровые сигнальные процессоры (DSP) и их применение»

xdsprobe: не проходит,правда, один тест

Отправлено vasay 28 января 2008 г. 16:00
В ответ на: CCS3.3 и SM510-PCI отправлено <font color=gray>vasay</font> 28 января 2008 г. 15:55

===============================================
xdsprobe -i -f board.cfg -v

-----[Print the controller-open software log-file]---------------------------

This utility has selected an XDS510 class product.
This utility will load the adapter 'sm510dvr.dll'.
This utility will operate on port address '0'.
The controller does not use a programmable FPGA.
The emulator adapter is named 'sm510dvr.dll'.
The emulator adapter is titled 'SM510PCI POD Adapter'.
The emulator adapter is version '33.12.0.0'.
The emulator adapter is using 'Normal-Mode'.
The controller has a version number of '1' (0x0001).
The controller has an insertion length of '16' (0x0010).
The local memory has a base address of '0' (0x000000).
The local memory has a word capacity of '262144' (0x040000).

-----[Perform the standard path-length test on the JTAG IR and DR]-----------

This path-length test uses blocks of 512 32-bit words.

| | / / - - \ \ The test for the JTAG IR instruction path-length failed.
The JTAG IR instruction scan-path is stuck-at-ones.

The test for the JTAG DR bypass path-length failed.
The JTAG DR bypass scan-path is stuck-at-ones.

-----[Perform the Integrity scan-test on the JTAG IR]------------------------

This test will use blocks of 512 32-bit words.
This test will be applied just once.

Do a test using 0xFFFFFFFF.
Scan tests: 1, skipped: 0, failed: 0
Do a test using 0x00000000.
Test 2 Word 0: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 1: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 2: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 3: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 4: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 5: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 6: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 7: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
The details of the first eight errors have been provided.
The utility will now report only the count of failed tests.
Scan tests: 2, skipped: 0, failed: 1
Do a test using 0xFE03E0E2.
Scan tests: 3, skipped: 0, failed: 2
Do a test using 0x01FC1F1D.
Scan tests: 4, skipped: 0, failed: 3
Do a test using 0x5533CCAA.
Scan tests: 5, skipped: 0, failed: 4
Do a test using 0xAACC3355.
Scan tests: 6, skipped: 0, failed: 5
Some of the values were corrupted - 83.2 percent.

The JTAG IR Integrity scan-test has failed.

-----[Perform the Integrity scan-test on the JTAG DR]------------------------

This test will use blocks of 512 32-bit words.
This test will be applied just once.

Do a test using 0xFFFFFFFF.
Scan tests: 1, skipped: 0, failed: 0
Do a test using 0x00000000.
Test 2 Word 0: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 1: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 2: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 3: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 4: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 5: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 6: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 7: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
The details of the first eight errors have been provided.
The utility will now report only the count of failed tests.
Scan tests: 2, skipped: 0, failed: 1
Do a test using 0xFE03E0E2.
Scan tests: 3, skipped: 0, failed: 2
Do a test using 0x01FC1F1D.
Scan tests: 4, skipped: 0, failed: 3
Do a test using 0x5533CCAA.
Scan tests: 5, skipped: 0, failed: 4
Do a test using 0xAACC3355.
Scan tests: 6, skipped: 0, failed: 5
Some of the values were corrupted - 83.2 percent.

The JTAG DR Integrity scan-test has failed.


Составить ответ | Вернуться на конференцию

Ответы


Отправка ответа
Имя*: 
Пароль: 
E-mail: 
Тема*:

Сообщение:

Ссылка на URL: 
URL изображения: 

если вы незарегистрированный на форуме пользователь, то
для успешного добавления сообщения заполните поле, как указано ниже:
введите число 97:

Перейти к списку ответов | Конференция | Раздел "Электроника" | Главная страница | Карта сайта

Rambler's Top100 Рейтинг@Mail.ru
 
Web telesys.ru