 Разработка, производство и продажа радиоэлектронной аппаратуры  |
Требуется программист в Зеленограде
- обработка данных с датчиков; ColdFire; 40 тыс. e-mail:jobsmp@pochta.ru |
This readme.txt file applies to the Altera Complete Design Suite
Version 6.1
Although we have made every effort to ensure that this version
of the Altera(R) software functions correctly, there may be
problems that we haven't encountered. If you have a question or
problem that is not answered by the information provided in
this readme.txt file, please contact Altera support at
1-800-800-EPLD or submit a Service Request at mysupport.altera.com.
This readme.txt file contains the following information:
* Location of Additional Information -- tells you where to find
additional information about the Altera Complete Design Suite
* Package Contents -- describes the contents of the Altera Complete
Design Suite
* System Requirements -- describes the system requirements for the
components of the Altera Complete Design Suite
Location of Additional Information
==================================
You can find additional information about the Altera Complete
Design Suite at the following locations:
Release Notes - for information about new features, known issues
and workarounds, timing model status, device support status,
revision history and supported versions of other EDA tools, please
refer to the Quartus II Software Release Notes, the Nios II EDS
Release Notes, and MegaCore IP Release Notes, available from the
Literature page of the Altera website.
Errata sheets that describe known issues with Altera MegaCore
functions and Nios II EDS are available from the Literature page
of the Altera website.
Installation & Licensing - for information about installing and
licensing your Altera design software, please refer to the
Quartus II Installation & Licensing manuals, which are available
in versions for UNIX & Linux and Windows workstations from the
Literature page of the Altera website.
Package contents
================
The Altera Complete Design Suite contains the following tools,
MegaCore functions, and documentation:
* Quartus II Design Software
* ModelSim-Altera VHDL and Verilog HDL Simulation Tool
* Nios II Embedded Design Suite
* DSP Builder
* MegaCore IP Library, which includes the following MegaCore
functions and their corresponding user guides
2D FIR Filter v6.1 #
2D Median Filter v6.1
8B10B Encoder/Decoder v6.1
Alpha Blending Mixer v6.1
ASI v6.1
CIC Compiler v6.1 *
Color Space Converter v6.1
CRC Compiler V6.1 *
Chroma Resampler V6.1
DDR & DDR2 SDRAM Controller v6.1
DDR SDRAM High Performance Controller V6.1 *
DDR2 SDRAM High Performance Controller V6.1 *
Deinterlacer v6.1
FFT/IFFT v6.1 #
FIR Compiler v6.1 #
Gamma Corrector v6.1
HyperTransport v6.1
Line Buffer Compiler v6.1
NCO Compiler v6.1
Nios II Embedded Processor v6.1 #
PCI Compiler v6.1
PCI Express Compiler v6.1 #
POS-PHY Level 2 & 3 Compiler v6.1
POS-PHY Level 4 v6.1
QDRII SRAM Controller v6.1
RapidIO v6.1 #
Reed-Solomon Compiler (Decoder & Encoder) v6.1
RLDRAM II Controller v6.1
HD/SD SDI v6.1 #
Scaler v6.1 #
SerialLite II v6.1
Triple Speed Ethernet V6.1 *
UTOPIA Level 2 Master v6.1
UTOPIA Level 2 Slave v6.1
Viterbi Compiler v6.1
* New in this release # New features in this release
Note: All Altera MegaCore function version numbers have been
updated to 6.1 in this release.
You can download software tools and the MegaCore IP Library
from the Altera Download Center at the following URL:
www.altera.com/download
The Altera Complete Design Suite also contains the following
technical documentation:
Introduction to Quartus II manual
Installation & Licensing manuals
Quartus II Handbook
AN 340: Altera Software Licensing
Quartus II Quick Start Guide
AN 320: OpenCore Plus Evaluation of Megafunctions
AN 343: OpenCore Evaluation of AMPP Megafunctions
Nios II Processor Reference Handbook
Nios II Software Developer's Handbook
Nios II C2H Compiler User Guide
DSP Builder User Guide
DSP Builder Reference Manual
You can download the most current versions of these
documents from the Literature pages of the Altera website
at www.altera.com.
System Requirements
===================
Software requirements
---------------------
The Quartus II Design Software is supported on the
following operating systems and versions:
Windows XP and Windows 2000 SP2 and later
or
Windows XP Pro X64 Edition
Solaris 8 and Solaris 9 w/ 32-bit kernel
Solaris 8 and Solaris 9 w/ 64-bit kernel
Red Hat Enterprise Linux 3 for 32-bit or for AMD64 or
Intel EMT64 64-bit CPUs
or
Red Hat Linux 4.0 for 32-bit and for AMD64 or Intel EMT64
64-bit CPUs
SUSE 9 Enterprise Linux
The ModelSim VHDL and Verilog HDL Simulation Tool is supported on
the following operating systems and versions:
Windows XP and Windows 2000 SP2 and later
Solaris 8 and Solaris 9
Red Hat Enterprise Linux 3
SUSE 9 Enterprise Linux
The Nios II Embedded Design Suite is supported on the following
operating systems and versions:
Windows XP and Windows 2000 SP2 and later
Red Hat Enterprise Linux 3 (32 bit)
Red Hat Enterprise Linux 4 (32 bit)
SUSE 9 Enterprise Linux (32 bit)
The Altera MegaCore IP Library is supported on the following
operating systems and versions:
Windows XP and Windows 2000 SP2 and later
or
Windows XP Pro X64 Edition
Solaris 8 and Solaris 9 w/ 32-bit kernel
Solaris 8 and Solaris 9 w/ 64-bit kernel
Red Hat Enterprise Linux 3 for 32-bit or
for AMD64 or Intel EMT64 64-bit CPUs
or
Red Hat Linux 4.0 for 32-bit and for AMD64
or Intel EMT64 64-bit CPUs
SUSE 9 Enterprise Linux
Some MegaCore Functions do not support all the listed operating
systems. Refer to the user guide for the individual MegaCore
function. Additional software, such as MATLAB is required for
some MegaCore functions. Refer to the User Guide for the
individual MegaCore function.
DSP Builder is supported on the following operating systems and
versions:
Windows XP and Windows 2000
The following additional software is required to run DSP Builder
MATLAB version 7.0 (R14) or later
Simulink version 6.0 (R14) or later
Quartus II software version 6.1 or later
Browser
The Quartus II software uses a web browser to display the
interactive tutorial and certain other features. If your
operating system does not provide a default browser, you must
configure a web browser in the Internet Connectivity page of
the Options dialog box.
FLEXlm
The Altera Complete Design Suite uses the FLEXlm license server
software to support network (multiuser) licensing.
If it is not installed, the Quartus II installation process
installs it automatically. However, if you already have FLEXlm
license server software installed for an application other than
the Quartus II or MAX+PLUS(R) II software, you should verify
that the version is 8.0 or later.
Display Manager
Linux
KDE version included in Red Hat distribution
Gnome version included in Red Hat distribution
Solaris
dtwm -- The CDE (DeskTop) Window Manager
vuewm -- A Window Manager from HP
mwm -- OSF/Motif Window manager.
olwm -- Open Look Window Manager from Sun
olvwm, a derivative, is also supported.
Hardware requirements/recommendations
-------------------------------------
Pentium III or later for Windows or Linux
or
Sun UltraSPARC-based Workstation for Solaris
Color display capable of 1024 X 768 pixel resolution
DVD-ROM drive
One or more of the following I/O ports:
- USB port (if using Windows XP or Windows 2000) for
USB-Blaster(TM) or MasterBlaster(TM)
communications cables, or APU programming unit
- Parallel port for ByteBlasterMV(TM) or
ByteBlaster(TM) II download cables
- Serial port for MasterBlaster communications cable
Memory requirements/recommendations
-----------------------------------
A full installation of the Altera Complete Design Suite version 6.1
requires approximately 5 GB of available disk space on the drive
or partition where you are installing the Altera Complete Design
Suite and approximately 30 MB of available space on the drive that
contains your TEMP directory (Windows only).
The Quartus II Stand-Alone Programmer requires a minimum of 1 GB
of RAM plus additional memory based on the size and number of SOF
files and the size and number of devices being configured.
Altera recommends that your system be configured to provide swap
space (virtual memory) equal to the recommended physical RAM that
is required to process your design.
The following table shows the memory required to process designs
targeted for Altera devices:
Device Recommended Physical RAM
32-bit 64-bit
-----------------------------------------------------------------
All ACEX(TM) 1K 256 MB
APEX(TM) 20K, APEX 20KE &
APEX 20KC
(EP20K30E, EP20K60E,
EP20K100/100E, EP20K160E,
EP20K200/200C/200E)
Cyclone(TM) (EP1C3, EP1C4 and EP1C6)
Cyclone II (EP2C5)
All FLEX 6000
All FLEX(R) 10KE
All FLEX 10KA
All MAX 3000A
All MAX 7000
All MAX 7000AE
All MAX 7000B
All MAX 7000S
MAX II (EPM240, EPM 570)
Mercury(TM) (EP1M120)
APEX 20K, APEX 20KE & 512 MB
APEX 20KC
(EP20K300E, EP20K400/400C/400E,
EP20K600C/600E)
APEX II (EP2A15, EP2A25, EP2A40)
Cyclone (EP1C12, EP1C20)
Cyclone II (EP2C8, EP2C20)
HardCopy(TM) Stratix (HC1S25)
MAX II (EPM1270, EPM2210)
Mercury (EP1M350)
Stratix(TM) (EP1S10, EP1S20)
Stratix GX (EP1SGX10)
Stratix II (EP2S15)
APEX 20KE & APEX 20KC 1024 MB
(EP20K1000C/1000E,
EP20K1500E)
Cyclone II (EP2C35, EP2C50)
HardCopy Stratix (HC1S30, HC1S40,
HC1S60)
Stratix (EP1S25, EP1S30, EP1S40, EP1S60)
Stratix GX (EP1SGX25, EP1SGX40)
Stratix II (EP2S30)
Stratix II GX (EP2SGX30)
APEX(TM) II (EP2A70) 1.5 GB 2.0 GB
Cyclone II (EP2C70)
HardCopy Stratix (HC1S80)
HardCopy II (HC210)
Stratix (EP1S80)
Stratix II (EP2S60, EP2S90)
Stratix II GX (EP2SGX60, EP2SGX90)
Stratix III (EP3SE50, EP3SL70)
Stratix II (EP2S130) 2.0 GB 3.0 GB
Stratix II GX (EP2SGX130)
HardCopy II (HC220)
Stratix III (EP3SE110, EP3SE150)
Stratix II (EP2S180) 3.0 GB 4.0 GB
HardCopy II (HC230, HC240)
Stratix III (EP3SL200)
Stratix III (EP3SE260) 4.0 GB 6.0 GB
Stratix III (EP3SL340) 4.0 GB 8.0 GB
