|
|
DS30498C-page 186
15.17.2 WDT CONTROL
The WDTEN bit is located in Configuration Word
Register 1 and when this bit is set, the WDT runs
continuously.
The SWDTEN bit is in the WDTCON register. When the
WDTEN bit in the Configuration Word Register 1 is set,
the SWDTEN bit has no effect. If WDTEN is clear, then
the SWDTEN bit can be used to enable and disable the
WDT. Setting the bit will enable it and clearing the bit
will disable it.
The PSA and PS<2:0> bits (OPTION_REG) have the
same function as in previous versions of the PIC16
family of microcontrollers.
|
|
E-mail: 
info@telesys.ru
