[an error occurred while processing this directive]
|
Собрал я тут себе программатор USBasp (http://www.fischl.de/usbasp/), он вроде как работает, но очень нестабильно. Нормально зашивает МК раз в 20-30 попыток.
Вот что получаю:
avrdude: Device signature = 0x1e9403
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "main.hex"
avrdude: input file main.hex auto detected as Intel Hex
avrdude: writing flash (1586 bytes):
Writing | ############avrdude: error: wrong count at writing 0
make.exe: *** [program] Error 1
Никак не могу понять в чем дело.. Может быть кто-то тоже повторял схему? Вносили какие-то изменения в прошивку программатора?
E-mail: info@telesys.ru