[an error occurred while processing this directive]
[an error occurred while processing this directive]
|
If you look in the datasheet for the 'F628, Table 17-7,
you will find info that is almost totally inscrutable.
It indicates that Timer1 will count to about 16 mhz, 1/60nsec,
in aynchronous mode.
In fact, when using the prescaler, it will count much faster
than this. Personally, I think the datasheet is wrong, and the
prescaler can go at least 50 mhz, 1/20nsec, like for Timer0.
E-mail: info@telesys.ru