[an error occurred while processing this directive]
|
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;*
;* in r16,PORTB ;read PORTB latch
;* sbr r16,(1<
;*
;* in r16,TIFR ;read the Timer Interrupt Flag Register
;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
;* rjmp TOV0_is_set ;jump if set
;* ... ;otherwise do something else