avreal/WIN32  -  AVR controllers LPT programmer by Redchuk Alexandr
v1.25rev5 (Jan 15 2007 20:02:38)  http://www.ln.com.ua/~real/avreal
bug-reports, suggestions and so on mail to avreal@real.kiev.ua

Command:
 -p1 -aa +mega88 -o100 -% -f -v
	% LPT base port 0x378
	% assume that LPT data writes not faster then 1uS
	% Atmel adapter for STK not found
	% ByteBlasterMV found
	% ByteBlaster mode
	% osc = 100kHz -> setup=20, hold=20,19
	% Reset
	% PgmOn reply  0x00005300
	% Synchronised after 1 try
	% GetID reply  0x0030001E
	% GetID reply  0x00300093
	% GetID reply  0x0030000A
	% Read ID: 0x1E930A
Device connected, MEGA88 detected
	% ReadLock command  0x58000000
	% ReadLock reply    0x005800FF
Chip not locked
	% ReadOsccal command  0x38000000
	% ReadOsccal reply    0x0038005A
	% ReadFuses command  0x50000000
	% ReadFuses reply    0x005000FF
	% ReadFuses command  0x58000000
	% ReadFuses reply    0x005800FF
	% ReadFuses command  0x58080000
	% ReadFuses reply    0x005808D6
	% ReadFuses command  0x50080000
	% ReadFuses reply    0x005008FF
Fuses 
  OSCCAL	= 5A
  CKDIV     	= 1
  CKOUT     	= 1
  SUT       	= 3
  CKSEL     	= F
  BLB1      	= 3
  BLB0      	= 3
  RSTDISBL  	= 1
  DWEN      	= 1
  WDTON     	= 1
  EESAVE    	= 0
  BODLEVEL  	= 6
  BOOTSZ    	= 3
  BOOTRST   	= 1
Verifying fuses
	% ReadFuses command  0x50000000
	% ReadFuses reply    0x005000FF
	% ReadFuses command  0x58000000
	% ReadFuses reply    0x005800FF
	% ReadFuses command  0x58080000
	% ReadFuses reply    0x005808D6
	% ReadFuses command  0x50080000
	% ReadFuses reply    0x005008FF
passed
Reset pin released
Adapter disabled